OOAK Table Tennis Forum

So I want a setup with a tacky brush looping rubber and the low throw blade to couter the high throw of tacky rubbers.

I have found that with my current tacky rubber and relatively flexy blade; that it's nearly impossible to close the blade angle enough to get the ball onto the table.

I'm thinking Galaxy T1, T2, T4

Edit: I was in a real rush to go somewhere

_________________
Oh my gawd. I haven't been on here since Sun Oct 18, 2009 6:52am
Stiga NCT Allround Wood : FH Tenergy 05 2.1 BH Bryce Speed 1.9

Nittaku Shellshock : Sriver FX 1.7/Feint Long II 0.5~~Darker 3Mai Gouban : Mark V 1.8/Solcion 1.9
Unused : Tenergy 64 1.9, Flextra 1.7, Micro 2.0, Mambo H 2.0, Mambo H 2.0, Reforma 2.0

Not quite following you here RD! Are you asking if the three T series blades are fast and crisp and low throw?

_________________
I'm always in the dark, but the Dark sheds lights upon everything!! Beauty is only pimple deep! Beauty is in the eye of the pipholder!
S/U 1: Blade: Bty Gergely . FH Black Andro Rasant 2.1 . BH Red Tibhar Grass Dtecs
S/U 2: Blade: Bty Gergely . FH Black Hexer+ 2.1 . BH Red GD Talon
S/U 3: Blade: Bty Gergely . No rubbers...thinking of adding Red Dtecs and Black Rasant
Aussie Table Tennis Shop / Aussie Table Tennis Facebook Page / Equipment Review Index / Read my Reb Report Blog: click here.

I use a Viscaria With 729 Higher to do the same thing on my FH.

Cool

If only I had more $$$$$$

*sigh*

_________________
Oh my gawd. I haven't been on here since Sun Oct 18, 2009 6:52am
Stiga NCT Allround Wood : FH Tenergy 05 2.1 BH Bryce Speed 1.9

Nittaku Shellshock : Sriver FX 1.7/Feint Long II 0.5~~Darker 3Mai Gouban : Mark V 1.8/Solcion 1.9
Unused : Tenergy 64 1.9, Flextra 1.7, Micro 2.0, Mambo H 2.0, Mambo H 2.0, Reforma 2.0

t1 and t2 are older tech rubbers with supposedly stronger carbon ping and not as good feel as T4 and T8.

while both t4 and t8 are fast stiff and low throw rubbers,

t4 has slight ping, and slight flex compared to t-8, not very forgiving.

t-8 has zero ping, very stiff, harder feel than t-4, better short game, more lethal, even less forgiving.

_________________
Blade: 729 F1 || FH: Joola Rhyzm max || BH: Tenergy 05 Max updated: 1/2014

Acoustic / Violin.

Bit pricy but I doubt you ever regret the purchase.

_________________
Tibhar Grass D.techs OX | Donic BigSlam 2.0mm .
Re-Impact Medusa (balsa / 1-ply cherry wood)
Frictionless strokes | Attacking pip strokes | Greggy's advice | Bollsbrother | Sebastian Sauer . . . . . .

Don't you mean blades?

I think that I might go for the t1 or the t2 or a really stiff and hard/soft allwood blade.

_________________
Oh my gawd. I haven't been on here since Sun Oct 18, 2009 6:52am
Stiga NCT Allround Wood : FH Tenergy 05 2.1 BH Bryce Speed 1.9

Nittaku Shellshock : Sriver FX 1.7/Feint Long II 0.5~~Darker 3Mai Gouban : Mark V 1.8/Solcion 1.9
Unused : Tenergy 64 1.9, Flextra 1.7, Micro 2.0, Mambo H 2.0, Mambo H 2.0, Reforma 2.0

Are you outta ya mind!


I wish I could get that new Nittaku Tenor as well!
But at 10,000Yen it's out of my range by a long shot!

_________________
Oh my gawd. I haven't been on here since Sun Oct 18, 2009 6:52am
Stiga NCT Allround Wood : FH Tenergy 05 2.1 BH Bryce Speed 1.9

Nittaku Shellshock : Sriver FX 1.7/Feint Long II 0.5~~Darker 3Mai Gouban : Mark V 1.8/Solcion 1.9
Unused : Tenergy 64 1.9, Flextra 1.7, Micro 2.0, Mambo H 2.0, Mambo H 2.0, Reforma 2.0

TBS and T-8 with Bryce or Quattro seem to have the low throw of a brick.

_________________
Goof-off chopping bat
Gambler All Rosewood
Aurus Soft / Gambler GXL .6 sponge

Status - Out of Business Janitor/Babysitter

The T8 isn't available here

_________________
Oh my gawd. I haven't been on here since Sun Oct 18, 2009 6:52am
Stiga NCT Allround Wood : FH Tenergy 05 2.1 BH Bryce Speed 1.9

Nittaku Shellshock : Sriver FX 1.7/Feint Long II 0.5~~Darker 3Mai Gouban : Mark V 1.8/Solcion 1.9
Unused : Tenergy 64 1.9, Flextra 1.7, Micro 2.0, Mambo H 2.0, Mambo H 2.0, Reforma 2.0

Get the T1, it has a good feel and is very fast. At one stage I owned 3 of them at the same time as I liked it, I only owned 1 T2.

_________________
the re-evolution of war
Bty Gergely Palio Macro Era 42.5 Max DHS H2 Max

What about the DHS Wind Series CW-C?

It seems very popular.....if you check the bestseller thing in the shop, it's rated 3rd!

_________________
Oh my gawd. I haven't been on here since Sun Oct 18, 2009 6:52am
Stiga NCT Allround Wood : FH Tenergy 05 2.1 BH Bryce Speed 1.9

Nittaku Shellshock : Sriver FX 1.7/Feint Long II 0.5~~Darker 3Mai Gouban : Mark V 1.8/Solcion 1.9
Unused : Tenergy 64 1.9, Flextra 1.7, Micro 2.0, Mambo H 2.0, Mambo H 2.0, Reforma 2.0

I've just had a brainwave! I could get the Joo Se Hyuk (hard and stiff) with Transcend SP one side and Feint Long II 0.6mm the other side!

That would combind my needs for the chopping game as well as the brush looping game!

_________________
Oh my gawd. I haven't been on here since Sun Oct 18, 2009 6:52am
Stiga NCT Allround Wood : FH Tenergy 05 2.1 BH Bryce Speed 1.9

Nittaku Shellshock : Sriver FX 1.7/Feint Long II 0.5~~Darker 3Mai Gouban : Mark V 1.8/Solcion 1.9
Unused : Tenergy 64 1.9, Flextra 1.7, Micro 2.0, Mambo H 2.0, Mambo H 2.0, Reforma 2.0

Butterfly Schlager Carbon with Bryce Speed both side. Low enough? Still OK to chop too!

_________________
ZLC ST
Re-Impact Mythods ST for trade

I found the T-4 to have quite a high throw, but I did come to it via a Schlager Carbon. I would still say it is high for a blade of this speed. The T-1 is lower throw and faster and the T-2 is lower throw and similar speed to the T-4 (very weight dependent though), but neither are in the same territory as the SC for being low throw.

You keep saying that various blades and rubbers are not available where you are. You have a big list of where you aren't, but are you in the UK? Because I don't have trouble getting any of these blades and rubbers here from internet retailers.

_________________
Fred 28